--text字段增加处理--创建测试表
create table test(id varchar(3),detail text)
insert into test
select '001','A*B'--定义添加的的字符串
declare @s_str varchar(8000),@postion int
select @s_str='*C' --要添加的字符串
,@postion=null --追加的位置,null 加在尾部,0 加在首部,其他值则加在指定位置--字符串添加处理
declare @p varbinary(16)
select @p=textptr(detail) from test where id='001'
updatetext test.detail @p @postion 0 @s_str--显示处理结果
select * from test
go--删除测试表
drop table test
--text字段的替换处理--创建数据测试环境
create table test(id varchar(3),txt text)
insert into test
select '001','A*B'
go--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='*' --要替换的字符串
,@d_str='+' --替换成的字符串--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(txt)
,@rplen=len(@s_str)
,@postion=charindex(@s_str,txt)-1
from test where id='001'while @postion>0
begin
updatetext test.txt @p @postion @rplen @d_str
select @postion=charindex(@s_str,txt)-1 from test
end--显示结果
select * from testgo
--删除数据测试环境
drop table test--text字段的添加处理存储过程--全表--创建测试表
create table [user](uid int,UserLog text)
create table [order](uid int,state bit)insert into [user]
select 1,'a'
union all select 2,'b'
union all select 3,'c'insert into [order]
select 1,1
union all select 2,0
union all select 3,1
go--处理的存储过程
CREATE PROCEDURE spUpdateUserLog
@StrLog text,
@State int
AS
--定义游标,循环处理数据
declare @uid int
declare #tb cursor for select a.uid from [user] a join [order] b on a.uid=b.uid
where state=@stateopen #tb
fetch next from #tb into @uid
while @@fetch_status=0
begin
--字符串添加处理
declare @p varbinary(16)
select @p=textptr(UserLog) from [user] where uid=@uid
updatetext [user].UserLog @p null 0 @StrLog
fetch next from #tb into @uid
end
close #tb
deallocate #tb
go--调用示例:
exec spUpdateUserLog '123',1--显示处理结果
select * from [user]go--删除测试环境
drop table [user],[order]
drop proc spUpdateUserLog/*--测试结果uid UserLog
----------- ----------
1 a123
2 b
3 c123(所影响的行数为 3 行)
--*/
--text字段的替换处理--全表替换--创建数据测试环境
create table test(id varchar(3),txt text)
insert into test
select '001','A*B'
union all select '002','A*B-AA*BB'
go--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='*' --要替换的字符串
,@d_str='+' --替换成的字符串
--定义游标,循环处理数据
declare @id varchar(3)
declare #tb cursor for select id from test
open #tb
fetch next from #tb into @id
while @@fetch_status=0
begin
--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(txt)
,@rplen=len(@s_str)
,@postion=charindex(@s_str,txt)-1
from test where id=@id
while @postion>0
begin
updatetext test.txt @p @postion @rplen @d_str
select @postion=charindex(@s_str,txt)-1 from test where id=@id
end fetch next from #tb into @id
end
close #tb
deallocate #tb--显示结果
select * from testgo
--删除数据测试环境
drop table test************************
支持text字段处理的仅有:
下面的函数和语句可以与 ntext、text 或 image 数据一起使用。
函数 语句
DATALENGTH READTEXT
PATINDEX SET TEXTSIZE
SUBSTRING UPDATETEXT
TEXTPTR WRITETEXT
TEXTVALID
1:替换--创建数据测试环境
create table #tb(aa text)
insert into #tb select 'abc123abc123,asd'--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='123' --要替换的字符串
,@d_str='000' --替换成的字符串--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(aa),@rplen=len(@s_str),@postion=charindex(@s_str,aa)-1 from #tb
while @postion>0
begin
updatetext #tb.aa @p @postion @rplen @d_str
select @postion=charindex(@s_str,aa)-1 from #tb
end--显示结果
select * from #tb--删除数据测试环境
drop table #tb/****************全部替换************************/
DECLARE @ptrval binary(16)
SELECT @ptrval = TEXTPTR(aa) FROM #tb WHERE aa like '%数据2%'
if @ptrval is not null -- 一定要加上此句,否则若找不到数据下一句就会报错
UPDATETEXT #tb.aa @ptrval 0 null '数据3'
/****************在字段尾添加**********************************/
--定义添加的的字符串
declare @s_str varchar(8000)
select @s_str='*C' --要添加的字符串
--字符串添加处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(detail) from test where id='001'
updatetext test.detail @p null null @s_str
总结:
1:Text字段类型不能直接用replace函数来替换,必须用updatetext
2:字段比较不能用 where 字段 = ‘某数据’,可以用like来代替
3:updatetext时,若@ptrval值为空会出错,需注意
create table test(id varchar(3),detail text)
insert into test
select '001','A*B'--定义添加的的字符串
declare @s_str varchar(8000),@postion int
select @s_str='*C' --要添加的字符串
,@postion=null --追加的位置,null 加在尾部,0 加在首部,其他值则加在指定位置--字符串添加处理
declare @p varbinary(16)
select @p=textptr(detail) from test where id='001'
updatetext test.detail @p @postion 0 @s_str--显示处理结果
select * from test
go--删除测试表
drop table test
--text字段的替换处理--创建数据测试环境
create table test(id varchar(3),txt text)
insert into test
select '001','A*B'
go--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='*' --要替换的字符串
,@d_str='+' --替换成的字符串--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(txt)
,@rplen=len(@s_str)
,@postion=charindex(@s_str,txt)-1
from test where id='001'while @postion>0
begin
updatetext test.txt @p @postion @rplen @d_str
select @postion=charindex(@s_str,txt)-1 from test
end--显示结果
select * from testgo
--删除数据测试环境
drop table test--text字段的添加处理存储过程--全表--创建测试表
create table [user](uid int,UserLog text)
create table [order](uid int,state bit)insert into [user]
select 1,'a'
union all select 2,'b'
union all select 3,'c'insert into [order]
select 1,1
union all select 2,0
union all select 3,1
go--处理的存储过程
CREATE PROCEDURE spUpdateUserLog
@StrLog text,
@State int
AS
--定义游标,循环处理数据
declare @uid int
declare #tb cursor for select a.uid from [user] a join [order] b on a.uid=b.uid
where state=@stateopen #tb
fetch next from #tb into @uid
while @@fetch_status=0
begin
--字符串添加处理
declare @p varbinary(16)
select @p=textptr(UserLog) from [user] where uid=@uid
updatetext [user].UserLog @p null 0 @StrLog
fetch next from #tb into @uid
end
close #tb
deallocate #tb
go--调用示例:
exec spUpdateUserLog '123',1--显示处理结果
select * from [user]go--删除测试环境
drop table [user],[order]
drop proc spUpdateUserLog/*--测试结果uid UserLog
----------- ----------
1 a123
2 b
3 c123(所影响的行数为 3 行)
--*/
--text字段的替换处理--全表替换--创建数据测试环境
create table test(id varchar(3),txt text)
insert into test
select '001','A*B'
union all select '002','A*B-AA*BB'
go--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='*' --要替换的字符串
,@d_str='+' --替换成的字符串
--定义游标,循环处理数据
declare @id varchar(3)
declare #tb cursor for select id from test
open #tb
fetch next from #tb into @id
while @@fetch_status=0
begin
--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(txt)
,@rplen=len(@s_str)
,@postion=charindex(@s_str,txt)-1
from test where id=@id
while @postion>0
begin
updatetext test.txt @p @postion @rplen @d_str
select @postion=charindex(@s_str,txt)-1 from test where id=@id
end fetch next from #tb into @id
end
close #tb
deallocate #tb--显示结果
select * from testgo
--删除数据测试环境
drop table test************************
支持text字段处理的仅有:
下面的函数和语句可以与 ntext、text 或 image 数据一起使用。
函数 语句
DATALENGTH READTEXT
PATINDEX SET TEXTSIZE
SUBSTRING UPDATETEXT
TEXTPTR WRITETEXT
TEXTVALID
1:替换--创建数据测试环境
create table #tb(aa text)
insert into #tb select 'abc123abc123,asd'--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='123' --要替换的字符串
,@d_str='000' --替换成的字符串--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(aa),@rplen=len(@s_str),@postion=charindex(@s_str,aa)-1 from #tb
while @postion>0
begin
updatetext #tb.aa @p @postion @rplen @d_str
select @postion=charindex(@s_str,aa)-1 from #tb
end--显示结果
select * from #tb--删除数据测试环境
drop table #tb/****************全部替换************************/
DECLARE @ptrval binary(16)
SELECT @ptrval = TEXTPTR(aa) FROM #tb WHERE aa like '%数据2%'
if @ptrval is not null -- 一定要加上此句,否则若找不到数据下一句就会报错
UPDATETEXT #tb.aa @ptrval 0 null '数据3'
/****************在字段尾添加**********************************/
--定义添加的的字符串
declare @s_str varchar(8000)
select @s_str='*C' --要添加的字符串
--字符串添加处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(detail) from test where id='001'
updatetext test.detail @p null null @s_str
总结:
1:Text字段类型不能直接用replace函数来替换,必须用updatetext
2:字段比较不能用 where 字段 = ‘某数据’,可以用like来代替
3:updatetext时,若@ptrval值为空会出错,需注意
create table test(id varchar(3),detail text)
insert into test
select '001','A*B'--定义添加的的字符串
declare @s_str varchar(8000),@postion int
select @s_str='*C' --要添加的字符串
,@postion=null --追加的位置,null 加在尾部,0 加在首部,其他值则加在指定位置--字符串添加处理
declare @p varbinary(16)
select @p=textptr(detail) from test where id='001'
updatetext test.detail @p @postion 0 @s_str--显示处理结果
select * from test
go--删除测试表
drop table test
--text字段的替换处理--创建数据测试环境
create table test(id varchar(3),txt text)
insert into test
select '001','A*B'
go--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='*' --要替换的字符串
,@d_str='+' --替换成的字符串--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(txt)
,@rplen=len(@s_str)
,@postion=charindex(@s_str,txt)-1
from test where id='001'while @postion>0
begin
updatetext test.txt @p @postion @rplen @d_str
select @postion=charindex(@s_str,txt)-1 from test
end--显示结果
select * from testgo
--删除数据测试环境
drop table test--text字段的添加处理存储过程--全表--创建测试表
create table [user](uid int,UserLog text)
create table [order](uid int,state bit)insert into [user]
select 1,'a'
union all select 2,'b'
union all select 3,'c'insert into [order]
select 1,1
union all select 2,0
union all select 3,1
go--处理的存储过程
CREATE PROCEDURE spUpdateUserLog
@StrLog text,
@State int
AS
--定义游标,循环处理数据
declare @uid int
declare #tb cursor for select a.uid from [user] a join [order] b on a.uid=b.uid
where state=@stateopen #tb
fetch next from #tb into @uid
while @@fetch_status=0
begin
--字符串添加处理
declare @p varbinary(16)
select @p=textptr(UserLog) from [user] where uid=@uid
updatetext [user].UserLog @p null 0 @StrLog
fetch next from #tb into @uid
end
close #tb
deallocate #tb
go--调用示例:
exec spUpdateUserLog '123',1--显示处理结果
select * from [user]go--删除测试环境
drop table [user],[order]
drop proc spUpdateUserLog/*--测试结果uid UserLog
----------- ----------
1 a123
2 b
3 c123(所影响的行数为 3 行)
--*/
--text字段的替换处理--全表替换--创建数据测试环境
create table test(id varchar(3),txt text)
insert into test
select '001','A*B'
union all select '002','A*B-AA*BB'
go--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='*' --要替换的字符串
,@d_str='+' --替换成的字符串
--定义游标,循环处理数据
declare @id varchar(3)
declare #tb cursor for select id from test
open #tb
fetch next from #tb into @id
while @@fetch_status=0
begin
--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(txt)
,@rplen=len(@s_str)
,@postion=charindex(@s_str,txt)-1
from test where id=@id
while @postion>0
begin
updatetext test.txt @p @postion @rplen @d_str
select @postion=charindex(@s_str,txt)-1 from test where id=@id
end fetch next from #tb into @id
end
close #tb
deallocate #tb--显示结果
select * from testgo
--删除数据测试环境
drop table test************************
支持text字段处理的仅有:
下面的函数和语句可以与 ntext、text 或 image 数据一起使用。
函数 语句
DATALENGTH READTEXT
PATINDEX SET TEXTSIZE
SUBSTRING UPDATETEXT
TEXTPTR WRITETEXT
TEXTVALID
1:替换--创建数据测试环境
create table #tb(aa text)
insert into #tb select 'abc123abc123,asd'--定义替换的字符串
declare @s_str varchar(8000),@d_str varchar(8000)
select @s_str='123' --要替换的字符串
,@d_str='000' --替换成的字符串--字符串替换处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(aa),@rplen=len(@s_str),@postion=charindex(@s_str,aa)-1 from #tb
while @postion>0
begin
updatetext #tb.aa @p @postion @rplen @d_str
select @postion=charindex(@s_str,aa)-1 from #tb
end--显示结果
select * from #tb--删除数据测试环境
drop table #tb/****************全部替换************************/
DECLARE @ptrval binary(16)
SELECT @ptrval = TEXTPTR(aa) FROM #tb WHERE aa like '%数据2%'
if @ptrval is not null -- 一定要加上此句,否则若找不到数据下一句就会报错
UPDATETEXT #tb.aa @ptrval 0 null '数据3'
/****************在字段尾添加**********************************/
--定义添加的的字符串
declare @s_str varchar(8000)
select @s_str='*C' --要添加的字符串
--字符串添加处理
declare @p varbinary(16),@postion int,@rplen int
select @p=textptr(detail) from test where id='001'
updatetext test.detail @p null null @s_str
总结:
1:Text字段类型不能直接用replace函数来替换,必须用updatetext
2:字段比较不能用 where 字段 = ‘某数据’,可以用like来代替
3:updatetext时,若@ptrval值为空会出错,需注意
--作者:大力
--用image类型
方法:
1、建立过程
CREATE PROCEDURE sp_textcopy (
@srvname varchar (30),
@login varchar (30),
@password varchar (30),
@dbname varchar (30),
@tbname varchar (30),
@colname varchar (30),
@filename varchar (30),
@whereclause varchar (40),
@direction char(1))
AS
DECLARE @exec_str varchar (255)
SELECT @exec_str =
'textcopy /S ' + @srvname +
' /U ' + @login +
' /P ' + @password +
' /D ' + @dbname +
' /T ' + @tbname +
' /C ' + @colname +
' /W "' + @whereclause +
'" /F ' + @filename +
' /' + @direction
EXEC master..xp_cmdshell @exec_str
2、建表和初始化数据
create table 表名 (编号 int,image列名 image)
go
insert 表名 values(1,0x)
insert 表名 values(2,0x)
go
3、读入
sp_textcopy '你的服务器名','sa','你的密码','库名','表名','image列名','c:\图片.jpg','where 编号=1','I' --注意条件是 编号=1
sp_textcopy '你的服务器名','sa','你的密码','库名','表名','image列名','c:\bb.doc','where 编号=2','I' --注意条件是 编号=2
go
4、读出成文件
sp_textcopy '你的服务器名','sa','你的密码','库名','表名','image列名','c:\图片.jpg','where 编号=1','O' --注意条件是 编号=1
sp_textcopy '你的服务器名','sa','你的密码','库名','表名','image列名','c:\bb.doc','where 编号=2','O' --注意条件是 编号=2
go